Power and Output transformer set 6L6 EL34 Amp build

Description

power and output transformer set 6L6 EL34 Amp build.I bought these for an amp project, but never used them. I was told they were made by Schaffer, who made transformers for Fender Guitar Amps.
NOTE: There is no winding for a tube rectifier, you must use a full wave solid state rectifier.
Power Transformer:
Primary :120V/240V windings
Secondaries
Brown: 315Vrms
Yellow: 249Vrms
Green: 6.3Vrms
Core is 2 7/8" X 2-3/8" X 1-1/4"
Output:
Primary (tube side)
Brown to CT(red) or Blue is Inductance 11H with Q of2.8 @120Hz
Secondaries (speaker side)
Turns ratio from brown to red to 8 Ohm tap is about 16. Should work for 6l6 or EL34 with a load Z of about 2K ohms.
Yellow : 8 Ohm
Green/Yellow  4 ohm
Black: 16 Ohm
Core is 1-1/2" X 3-1/8" X 3-3/4"
The 2 transformers weigh about 8 lbs.